Nautical Napkins

I was walking through my local stitch shop drooling over the beautiful fabric they have scattered throughout the store.

Screen Shot 2015-08-11 at 3.44.27 PM

See that little stack with the red & blue lobsters? It called to me. I picked up the sweet little stack and drooled over the variations! The light blue whales in the top left corner was not part of the original group, but since the bride had a whale theme I felt the need to include them.

DSC_0183

I then tried to figure out what size to make the napkins since they were pre-cut fat quarters.

IMG_8404 IMG_8405 IMG_8406

Do I go for the large size? Medium? Small?

I finally decided on the small size, each quarter becoming 4 small napkins.

IMG_8451

Having a cutting board, ruler and rotary cutter has been amazing. It makes a huge difference in terms of cutting a bunch at time.

I followed these steps to make mitered corners. It became easier and easier to make each one. The burnt fingers was not fun, but using an iron made a HUGE difference.

IMG_8452IMG_8464

In the end the napkins worked out perfectly and were so much fun to do. I can’t wait to make more!

IMG_8640

xoxo Hannah

Advertisements

Nautical Love

This has been a long time coming. Our dear Fifi was married this past June. Their wedding was to take place in a scenic, beautiful, tiny town by the sea. The bride & groom rented a few houses right on the water, providing many beautiful pictures for the fun leading up to the wedding.

I knew from the moment they were engaged I wanted to create something they could love for the rest of their lives that would subtly remind them of their wedding day. Due to the nautical aspect of their wedding, whale themed, I wanted to stick with that theme.

I began playing with the idea of signal flags, traditionally used for communication between boats, and now is more decorative. Once I discovered the date & location of the wedding I began playing around with the flags. With grid paper and colored pencils I started playing around. I knew I was going to include the following words & numbers

  • FIONA (5)
  • ALEX (4)
  • 06 13 (4)
  • LITTLE (6)
  • COMPTON (7)

The difficulty began for me when some of the words were an even number of letters, and the others odd. This meant I would need to have an offset grid. After many starts and stops I came up with this idea.

My original plan was to knit each flag in super chunky yarn, then sew them together, and back it. I made 5 flags before I realized it wasn’t going to work.

So back to the drawing table I went. Although I had never sewn something more intense then the napkins I made for Fiona’s shower, I decided to make a quilt. With zero quilt making experience.

I took a mug rug class at my local stitch shop. It was lovely for several reasons, one of them being that it let me learn the basics of everything quickly.

IMG_8671

I then did some *gasp* math to figure out how much fabric to buy. Easy since I decided for each flag to be a perfect square, just a lot of LxW/2 etc. I then was able to figure out how much fabric in each color to buy. (I still overbought out of paranoia). Originally I thought to have the flags touch, but it wasn’t visually clear. So I put strips in between each.

Then I put the flags together in strips, line by line. Then I attached the lines together, trimmed the outside. Then I stitched in the ditch to attach the back to the front. The original plan was for this to be a twin sized blanket. It’s a queen now.

IMG_8760

I can’t wait to make my next quilt!

Screen Shot 2015-08-11 at 9.44.01 AM

XOXO Hannah

The PurlBee’s DIY Citrus Coasters

I made these sweet coasters using a tutorial from The PurlBee, and they’re great!  On top of looking adorable, they are very straightforward and a great activity for those of us who like to have something to work on while unwinding after a long day.  For a complete rundown, and the pattern for cutting out the felt pieces, check out the original tutorial here:

What you’ll need:

  • citrus-colored felt (I was easily able to find yellow, orange, green, a blood-orange red, and a hot pink)
  • white felt
  • white embroidery floss (I went with this for a chunkier look than the original one)
  • a big, sharp needle
  • sharp scissors
  • for best results, I recommend adding a glass of wine
  • this pattern from The PurlBee

Then:

  1. I found it most helpful to cut out as many pieces ahead of time as possible, so I wouldn’t need to keep going back and forth from cutting to sewing.
  2. It would be redundant for me to rehash all the steps from The PurlBee, but I will add a couple tips:
    • You should be prepared to wing it a bit!  The pieces don’t always line up exactly how you want them to, which is tricky because you’re trying to form a little circle out of wedge-shapes, so be prepared to have to trim them as you go!
    • The pieces may shift around a bit while you’re sewing them, even if you’re able to pin them down.  I found it worked fine (and was maybe easier) to lay the pieces out to start, then set all but one wedge aside and just sew one at a time.  There are fewer pins to accidentally jab yourself with that way.
    • Experiment and have fun!

IMG_1167

IMG_1103

DIY Hufflepuff Quidditch Uniform

1464634_10202970241437444_5863034208161998706_n

So people asked me to put together a tutorial of how I made my quidditch uniform. I want to preface this a few comments. 


1. This was for self enjoyment. I made it to make myself happy, no intentions to sell/replicate it so I apologize for any parts you find confusing. 

2. I don’t sew. I’m a knitter by trade so I’m comfortable with making things, but not fabric. So the way I did things may not make sense. I have NEVER made a garment before. Ever. Not even a pillowcase. 

3. I really encourage anyone who makes this to go with your intuition. Change it! Add to it! Make it your own. 


Supplies:

  • 3 yards of main color (yellow)
  • 1 yard of contrasting color (black)
  • 1 roll of thick ribbon (black)
  • Pins
  • Sewing machine
  • Needles 
  • Thread (both in black and yellow)

Measurements: I’m 5’5 around 150 lbs for sizing help. I tend to wear a medium in everything. 

I over bought the fabric. I was scared I wouldn’t have enough. In the end I was left with a few scraps.

Although it was not my intention the yellow fabric was held double. You could see the black through the yellow a bit, and I didn’t want that. Although having the two layers of fabric may have made it more sturdy. ( when doing any of the other houses you probably won’t face the same problem as the secondary colors are lighter)

My first step was to fold the yellow in half. Then quarters. This ensured that both halves of the garment would be equal. 

IMG_6841

I measured my torso (I have a weirdly long torso!) then marked it off on the fabric. Then cut the square out.

Basically you cut one corner out of the non-folded side. This part will become the front of the shirt. SO SAVE IT.

IMG_6838

Then you open it up, still with the yellow layered. Lay the black over the bottom, large rectangle. Hem all of the edges together.

IMG_6840

Then cut a slit down the center and hem off those edges.

Then place the front piece on top, and sew the shoulders up.

IMG_6839

Now it is like a smock! So at this point I sewed D-rings on the front and back and clipped them together on either side.

IMG_6842 

The finishing pieces were all hand sewn on, the number, the “pocket”. The letters were iron on letters from the store.

Screen Shot 2014-11-13 at 12.44.52 PM

AGAIN, I’m not a seamstress, so this isn’t going to be super clear, but it is the best I could do.

XOXO HANNAH